Turbocharger Oil Return Pipe Replacement (LBS/A20DTH)

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Turbocharger Oil Return Pipe Replacement (LBS/A20DTH)

Turbocharger Oil Return Pipe Replacement (LBS/A20DTH)

Callout

Component Name

Preliminary Procedure

1.

Remove the engine cover. Refer to Engine Cover Replacement .

2.

Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LBS/A20DTH) Exhaust Manifold Heat Shield Replacement (LBY/A20DTR) Exhaust Manifold Heat Shield Replacement (LLU/A16LET) Exhaust Manifold Heat Shield Replacement (LHU/A20NFT) .

3.

Remove the charge air cooler inlet pipe from turbo to get access. Refer to Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement (LBY/A20DTR) Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement (LBS/A20DTH) .

1

Turbocharger Oil Return Pipe Fastener (Qty: 2)

Refer to Fastener Caution .

Tighten

9 Nm (80 lb in)

2

Turbocharger Oil Return Pipe Fastener

Tighten

25 Nm (18 lb ft)

3

Turbocharger Oil Return Pipe

Procedure

Discard the old gasket and install NEW turbocharger oil return pipe gaskets prior to installation of the pipe.