SAAB WIS ONLINE

Turbocharger Oil Return Pipe Replacement (LBY/A20DTR)

Turbocharger Oil Return Pipe Replacement (LBY/A20DTR)



Callout Component Name

Preliminary Procedure

1. Remove the engine cover. Refer to Engine Cover Replacement .

2. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LBS/A20DTH) Exhaust Manifold Heat Shield Replacement (LBY/A20DTR) Exhaust Manifold Heat Shield Replacement (LLU/A16LET) Exhaust Manifold Heat Shield Replacement (LHU/A20NFT) .

3. Remove the charge air cooler inlet pipe from turbo to get access. Refer to Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement (LBY/A20DTR) Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement (LBS/A20DTH) .

4. Remove the engine shield. Refer to Engine Shield Replacement .


1

Turbocharger Oil Return Pipe Fastener (Qty: 2)

Refer to Fastener Caution .

Tighten

25 Nm (18 lb ft)

2

Turbocharger Oil Return Pipe Fastener (Qty: 2)

Tighten

9 Nm (80 lb in)

3

Turbocharger Oil Return Pipe Fastener (Qty: 2)

Tighten

9 Nm (80 lb in)

4

Turbocharger Oil Return Pipe

Procedure

Discard the old gaskets and install NEW turbocharger oil return pipe gaskets prior to installation of the pipe.