Automatic Transmission Flex Plate Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Automatic Transmission Flex Plate Removal

Special Tools

EN-46106 Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools .

1.	Install the EN 46106 holder through the starter mounting hole.

2.	Remove the 8 automatic transmission flex plate bolts (1).

3.	Remove the automatic transmission flex plate (2).

4.	Remove the EN 46106 holder.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.