Engine Flywheel Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Engine Flywheel Removal

Special Tools

EN 46106 Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools .

1.	Install the EN 46106 through the starter mounting hole.

2.	Remove the engine flywheel bolts and discard.

3.	Remove the engine flywheel from the crankshaft.

4.	Remove the EN 46106.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.