Oil Pan Cleaning and Inspection
|
|
Oil Pan Cleaning and Inspection
|
Special Tools
EN 28410
Gasket removal tool
For equivalent regional tools, refer to
Special Tools
|
1.
|
Remove any old thread sealant, gasket material or sealant using
EN 28410
remover.
|
|
2.
|
Clean the oil pan and oil pan components in solvent.
|
|
3.
|
Clean out debris from the bolt holes.
|
|
1.
|
Inspect the exterior of the oil pan for the following conditions:
|
|
|
•
|
Dents or damage to the exterior (2)
|
|
|
•
|
Damage to the drain plug or drain plug hole (1)
|
|
|
•
|
Damage to the transaxle brace mounting bosses (4)
|
|
|
•
|
Damage to the transaxle mounting bosses (3)
|
|
2.
|
Inspect the interior of the oil pan for the following conditions:
|
|
|
•
|
Gouges or damage to the oil pan sealing surfaces (1)
|
|
|
•
|
Damage to the oil pan scraper mounting holes (2)
|
|
|
•
|
Damage to the bolt holes (3)
|
|
3.
|
Repair or replace the oil pan and/or oil pan components as necessary.
|
