Gear lever bearing (spherical socket and spherical socket ring)
|
Gear lever bearing (spherical socket and spherical socket ring)
|
1.
|
Remove the gear rod as described in Section "Gear Lever".
|
2.
|
Remove the spring which secures the spherical socket ring and disconnect the spherical socket ring by turning it anticlockwise (bayonet socket). Remove the spherical socket.
|
3.
|
In order to remove the spherical socket ring from the gear lever the gear lever knob must be removed. See Section "Gear Lever Knob".
|
1.
|
Lubricate the bearing with Gleitmo 750.
|
2.
|
Fit the gear lever in the spherical socket.
|
3.
|
Hook the spring on to the spherical socket hook. Place the ring in the spherical socket and ensure that the spring is
under
the heels of the ring. Then tighten and secure the spring in the spherical socket's hook.
|
4.
|
Fit the gear lever in the gear lever housing as described in Section "Gear Lever".
|