SAAB WIS ONLINE

Replacing support sleeve

Replacing support sleeve

Precondition: clutch shaft and arm removed. (See section on dismantling, assembly).


1. Remove the three screws and remove the support sleeve. Put the three screws in a safe place.


2. Lubricate the sealing ring with gearbox oil.

3. Fit the support sleeve.

4. Apply Loctite 577 thread locking compound to the three bolts and fit them in place. See


Tightening torque 12 Nm (8.4 lbf ft)



Important

Do not forget thread-sealing agent on the through screws on the support sleeve. Risk of oil leakage.