ABS hydraulic unit
ABS hydraulic unit |
Removal |
1. |
Remove the steady bar secured
between the suspension struts.
|
2. |
Unplug the connector and the electric leads under the black plastic
cover secured with a torx screw. Also disconnect the ground cable.
|
3. |
Unscrew the brake pipe connections and plug the holes.
|
4. |
Remove the three nuts securing the hydraulic unit to the bracket. If necessary,
remove the power steering fluid reservoir to improve accessibility.
|
5. |
Lift out the hydraulic unit.
|
Fitting |
1. |
Fit the hydraulic unit in place
and tighten the three nuts.
|
2. |
Screw the brake pipes in place.
|
3. |
Plug in the electric leads and connector, reconnect the ground cable and fit the
plastic cover over the wiring.
|
4. |
Refit the power steering fluid reservoir if it was removed.
|
5. |
Fit the steady bar between the suspension struts.
|
6. |
Bleed the brake system (see
).
|