SAAB WIS ONLINE

Door window

Door window

To remove


1. Remove the door trim. See .

2. Lower the window.

3. Remove the cover in the top rear corner of the door.


4. Remove the outer window-well seal. The seal is fastened with a clip at the rear end.

5. Remove the inner window-well seal.

6. Fold down the water drainage.

7. Remove the clip and detach the arm on the lift mechanism from the runner in the aluminium rail on the window.


8. Remove the screws securing the window to the lift mechanism.

9. Lift out the window from the door. Hold the lift mechanism away from the window to make it easier to lift it out.


To fit



1. Raise the lift mechanism.

2. Guide the plastic bushings on the window into the rear window guide rails. Lower the window slightly and tighten the screws securing the window to the lift mechanism.

3. Attach the arm on the lift mechanism to the runner in the aluminium rail.

4. Press on the clip.

5. Adjust the door window. See .

6. Put the water drainage in place.


7. Put the inner window-well seal in place.

8. Put the outer window-well seal in place. Press the clip onto the rear end.

9. Put back the cover on the top rear corner of the door.

10. Put back the door trim. See .