Fifth bow motors
Fifth bow motors |
To remove |
1. |
Operate the soft top so that it is in the position illustrated.
|
2. |
Remove the side trim. See
|
3. |
Remove the screws securing the motor.
|
4. |
Cut off the cable ties.
|
5. |
Unplug the electrical connector and lift up the motor.
|
To fit |
1. |
Put the motor in place and connect the wiring.
|
2. |
Fit new cable ties so that the wiring is not damaged when the soft top is operated.
|
3. |
Apply threadlocker to the motor retaining screws and tighten them.
|
4. |
Put back the side trim. See
|
5. |
Connect the diagnostic tool, clear any diagnostic trouble codes and then program the control module. See
.
|