SAAB WIS ONLINE

Microswitch in soft top cover latch

Microswitch in soft top cover latch

To remove


The following description applies to removing the right-hand microswitch. The left-hand microswitch is removed in the same way.


1. Remove the rear side trim. See .

2. Remove the screws securing the microswitch.

3. Unplug the connector and remove the microswitch.


To fit



1. Put the microswitch in place and tighten the screws.

2. Plug in the connector.

3. Put back the rear side trim. See

4. Connect the diagnostic tool and clear any diagnostic trouble codes.