SAAB WIS ONLINE

Rear seat belt

Rear seat belt

To remove


1. Remove the rear side trim. See .

2. Remove the screw securing the seat belt to the floor.

3. Remove the screw securing the strap guide.


4. Remove the clips securing the upholstery above the long load opening.

5. Remove the clips securing the upholstery below the long load opening.


6. Fold back the upholstery and remove the screw securing the belt reel.

7. Lift away the seat belt.


To fit



1. Put the belt reel in position and tighten the screw.

Tightening torque 45 Nm (33.3 lbf ft)

2. Reposition the upholstery and press on the clips securing it below the long load opening.

3. Press on the clips securing the upholstery above the long load opening.


4. Put the strap guide in position and tighten the screw.

Tightening torque 45 Nm (33.3 lbf ft)

5. Tighten the screw securing the seat belt to the floor.

Tightening torque 45 Nm (33.3 lbf ft)