Rear side window and lift mechanism.
|
Rear side window and lift mechanism.
|
1.
|
Remove the rear side trim. See
.
|
2.
|
Mark out the position of the screws and then remove the inner window-well seal holder.
|
3.
|
Remove the outer window-well seal.
|
4.
|
Remove the loudspeaker.
|
6.
|
Loosen the nuts securing the lift mechanism to the body.
|
7.
|
Lift the lift mechanism out from the mounting groove in the body, lower it and unplug the connector to the lift motor.
|
8.
|
Lift up the window and lift mechanism.
|
9.
|
When changing the mechanism or window separately, remove the screws securing the window to the lift mechanism. When changing the window only, the position of screw "A" must be marked out.
|
1.
|
Put the window in place on the lift mechanism and tighten the screws.
|
2.
|
Lower the window and lift mechanism into the window well and plug in the connector.
|
3.
|
Put the lift mechanism in place and tighten the nuts securing it to the body as marked.
|
4.
|
Refit the loudspeaker.
|
5.
|
Refit the outer window-well seal.
|
6.
|
Screw on the inner window-well seal holder as marked.
|
7.
|
Adjust the rear side window. See
.
|
8.
|
Put back the rear side trim. See
|