Soft top cover latch
Soft top cover latch |
To remove |
1. |
Remove the rear side trim. See
.
|
2. |
Fold down the backrest.
|
3. |
Mark out the position of the control cable and then loosen the nuts.
|
4. |
Remove the clips securing the cable and fold the cable to one side.
|
5. |
Remove the screws securing the microswitch and move the switch away from the latch.
|
6. |
Mark out the position for the latch lengthways and in height.
|
7. |
Remove the retaining nuts and lift away the latch.
|
To fit |
1. |
Fit the latch as marked and tighten the nuts.
|
2. |
Put the microswitch in place and tighten the screws.
|
3. |
Put the control cable in place in its previously adjusted position and tighten the nuts.
|
4. |
Put the end of the cable in place on the latch and press on the clip.
|
5. |
Check the latch function. Adjust as necessary. See
.
|
6. |
Put back the side trim. See
|