Replacement of electronic unit
|
|
Replacement of electronic unit
|
|
1.
|
Remove the seat,
.
|
|
2.
|
Unplug the switch connector from the electronic unit.
|
|
3.
|
Snip through the cable tie holding the electronic unit to the rear bracket.
|
|
4.
|
Undo the front clip, which holds the electronic unit, from the bracket.
|
|
5.
|
Extract the electronic unit from the rear clip.
|
|
6.
|
Unplug the connectors from the motors and position sensors.
|
|
7.
|
Unplug the 8-pin connector in the seat frame.
|
|
8.
|
Remove the relay holder, drill out the heads of the pop rivets.
|
|
9.
|
Remove the wiring from the relay holder and the 8-pin connector.
|
Fit in reverse order.
