Upholstery, backrest
Upholstery, backrest |
1. |
Remove the seat,
.
|
2. |
Loosen the rear edge of the cowl.
|
3. |
Remove the head restraint,
.
|
4. |
Remove the head restraint locating sleeves,
.
|
5. |
Cut the staples securing the lower edge of the upholstery.
|
6. |
Prise open the metal tabs to release the rods tensioning the upholstery at the front.
|
7. |
Pull off the upholstery and cut the rest of the staples.
|
8. |
Pull off the seat upholstery.
|
To fit |
1. |
Pull on the upholstery to the first wire rod.
|
2. |
Fit the head restraint locating sleeves,
.
|
3. |
Fit the staples securing the upholstery to the foam padding, using the tool supplied with assembly kit,
.
|
4. |
Press out the padding so that it fills the upholstery.
|
5. |
Hook the rods into place and secure them by means of the metal tabs.
|
6. |
Fix the lower edge of the upholstery by means of staples.
|
7. |
Fit the head restraint,
.
|
8. |
Secure the rear edge of the cowl.
|
9. |
Fit the seat.
|