SAAB WIS ONLINE

Headlining

Headlining

The headlining is available in three versions:


A. Headlining for an outer roof with bonded rear window is fitted with blind rivets.

B. Headlining for an outer roof with rear window mounted with clips. Headlining fitted with screws.

C. Headlining for outer roof with rear window mounted with clips. Headlining fitted with screws and also secured with screws in the front of the first bow.


To remove

Operate the soft top to half open position.


1. Drill away the blind rivets securing the headlining.


If the soft top is fitted with a rear window mounted with clips instead of adhesive:

Remove the screws securing the headlining.

2. Remove the screws securing the back of the headlining.

3. Detach the headlining from the Velcro strip.

If the headlining is screwed:

Fold down the cloth flap and remove the screws.

4. Mark out the position for the ends of the headlining retaining rails on the second bow. Then remove the strip holding the headlining to the second bow.


5. Mark out the position for the ends of the headlining retaining rails on the third bow. Then remove the strip holding the headlining to the third bow.

6. Remove the headlining retaining strip from the fourth bow.

7. Lift out the headlining.


To fit

If the Velcro strip has come loose, the headlining can be screwed on after modifying the first bow. See

Operate the soft top to half open position.


1. Place the headlining in the car and insert the retaining strip into the fourth bow.


2. Tighten the screws securing the rear of the headlining.

3. Position the headlining retaining rails to the mark in the third bow and press on the strip securing the headlining to the third bow.

4. Position the headlining retaining rails to the mark in the second bow and press on the strip securing the headlining to the second bow.

5. Version A and B:


Press the front of the headlining to the Velcro strip.

Version C:

Fold up the cloth band and screw it to the first bow. Fold forward the headlining and press together the Velcro strips.

6. Blind rivet/screw on the headlining.

7. Position the headlining around the rear window and press it onto the Velcro strip.