Strap guide cover
| Strap guide cover |
| To remove |
| 1. |
Remove the rear side trim. See
.
|
|
| 2. |
Remove the screw securing the strap guide cover.
|
|
| 3. |
Remove the clips securing the strap guide cover and lift it away from the trim.
|
|
| 4. |
Remove the interior lighting from the strap guide cover.
|
|
| To fit |
| 1. |
Put the interior lighting in place on the strap guide cover.
|
|
| 2. |
Fit the strap guide cover to the trim and press on the clips.
|
|
| 3. |
Tighten the screw.
|
|
| 4. |
Put back the side trim. See
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
