SAAB WIS ONLINE

Main motors

Main motors

To remove

The main motors are supplied with ratchets as a spare part. Change the ratchets if necessary. See


1. Remove the soft top assembly. See

2. Place the soft top on a workbench.

3. Cut off the cable ties and remove screw A at the reinforcement.


4. Loosen screw B and move the reinforcement out of the way.

5. Unplug the electrical connectors.

6. Remove the four motor retaining screws and lift away the motor.


To fit



1. Apply threadlocker to the motor retaining screws and fit the motor to the soft top mechanism.

2. Reposition the reinforcement and tighten screws A and B.

3. Plug in the connectors and secure the wires with cable ties so that they will not be damaged when the soft top is operated.

4. Put back the side trim. See

5. Fit the soft top assembly on the car. See

6. Connect the diagnostic tool, clear any diagnostic trouble codes and then program the control module. See .