DTC P0068 MANIFOLD PRESSURE SENSOR RANGE/PERFORMANCE
|
DTC P0068 MANIFOLD PRESSURE SENSOR RANGE/PERFORMANCE
|
CHECK ANY OTHER DTC ON DISPLAY.
Is any other
DTC displayed?
Inspect DTC using “List
of Diagnostic Trouble Code (DTC)”.
CHECK AIR INTAKE SYSTEM.
Are there holes,
loose bolts or disconnection of hose on air intake system?
Repair air intake system.
CHECK PRESSURE SENSOR.
Start the engine and warm-up engine until coolant temperature
is greater than 60°C (140°F).
Place the selector lever or shift lever in “P” or “N” position.
Turn the A/C switch to OFF.
All accessory switches OFF.
Read the data of intake manifold pressure sensor signal
using Vehicle Diagnostic Interface
or OBD-II general scan tool.
Note
|
•
|
Vehicle Diagnostic Interface
For detailed operation procedures, refer to “READ
CURRENT DATA FOR ENGINE”.
|
•
|
OBD-II general scan tool
For detailed operation procedures, refer to the OBD-II General
Scan Tool Instruction Manual.
|
Ignition ON: Is the measured value 73.3 — 106.6
kPa (550 — 800 mmHg, 21.65 — 31.50 inHg)? Idling:
Is the measured value 20.0 — 46.7 kPa (150 — 350
mmHg, 5.91 — 13.78 inHg)?
Replace the manifold absolute pressure
sensor.
CHECK THROTTLE POSITION.
Read the data of throttle position signal using Vehicle
Diagnostic Interface or OBD-II general scan tool.
Note
|
•
|
Vehicle Diagnostic Interface
For detailed operation procedures, refer to “READ
CURRENT DATA FOR ENGINE”.
|
•
|
OBD-II general scan tool
For detailed operation procedures, refer to the OBD-II General
Scan Tool Instruction Manual.
|
Is the measured value less than 5% when throttle
is fully closed?
Adjust or replace the throttle
position sensor.
CHECK THROTTLE POSITION.
Is the measured
value more than 85% when throttle is wide open?
Replace the manifold absolute
pressure sensor.
Replace the throttle position sensor.