Condenser
Condenser |
Important | ||
The A/C receiver and the compressor oil absorb moisture from the air, which can then not be removed. Plug all connections that are opened immediately. |
||
To remove |
1. |
Put the car on a lift.
|
2. |
Drain the refrigerant from the A/C system, see
Draining and filling the refrigerant
.
|
3. |
Remove the headlamp screws.
|
4. |
Remove the bumper's two-stage rivets.
|
5. |
Dismantle the
upper radiator cross member
.
|
6. |
Raise the car.
|
7. |
Remove the lower engine cover.
|
8. |
Remove the right hand radiator mounting.
|
9. |
Dismantle the condenser's lower PAD connection. Plug the openings.
|
10. |
Lower the car.
|
11. |
Dismantle the bumper's 3 screws in the right front wheel housing.
|
12. |
Carefully pull out the bumper on the right hand side and then move the bumper a little forwards.
|
13. |
Dismantle the right
headlamp
.
|
14. |
Dismantle the condenser upper PAD connection. Plug the openings.
|
15. |
Dismantle the condenser's upper screws.
|
16. |
Carefully lift out the condenser.
|
To fit |
1. |
Adjust the oil quantity in the A/C system. See
Filling and adjusting the compressor oil
.
|
2. |
Insert the condenser into position. Take care so that the lower PAD connection does not catch on the condenser. Make sure the condenser lower mounting is fitted correctly.
|
3. |
Fit the condenser's upper screws.
|
4. |
Replace the sealing washer and fit the condenser's upper PAD connection.
Tightening torque 18 Nm (13 lbf ft) |
5. |
Fit the
right hand headlamp
and its connector.
|
6. |
Fit the bumper on the right hand side.
|
7. |
Fit the bumper's 3 screws in the right front wheel housing.
|
8. |
Raise the car.
|
9. |
Replace the sealing washer and fit the condenser's lower PAD connection.
Tightening torque 18 Nm (13 lbf ft) |
10. |
Fit the right hand radiator mounting.
|
11. |
Fit the lower engine cover.
|
12. |
Lower the car.
|
13. |
Fit the
upper radiator cross member
.
|
14. |
Fit the two-stage rivets on the bumper.
|
15. |
Fit the screws on the headlamps
|
16. |
Vacuum pump and fill the A/C system with refrigerant. See
Draining and filling the refrigerant
.
|
17. |
Check the performance of the A/C system. See
A/C system performance test
.
|