SAAB WIS ONLINE

A/C compressor, Z19

A/C compressor, Z19

To remove


1. Drain the car of refrigerant, see Draining and filling of refrigerant.

2. Remove and plug the pipe connection. Use 82 92 948 Plugs, A/C system, kit .


3. Detach the electrical connection.


4. Raise the car.

5. Remove the Drive belt, Auxiliary unit .

6. Remove the A/C compressor.


To fit


1. Fill with oil in accordance with Filling and adjustment of compressor oil .

2. Fit the A/C compressor.

Tightening torque: 24 Nm (18 lbf ft)


3. Attach the electrical connection.

4. Fit the Drive belt, Auxiliary unit .

5. Lower the car to the floor.

6. Fit the pipe connection with new seals. Use Vaseline Klüber Syntheso Pro AA2 .

Tightening torque: 18 Nm (13 lbf ft)


7. Evacuate the A/C system and refill with refrigerant. See Draining and filling of refrigerant .

8. Running in the compressor to distribute the compressor oil in the system:

- Activate the A/C and let it run for at least 2 minutes at an engine speed of <1350 rpm.

9. Test the A/C system. See Performance test, A/C system .