Crankshaft seal ring, rear
Crankshaft seal ring, rear |
To remove |
1. |
Remove the gearbox. See
Gearbox removal Z19
or
Gearbox assembly, Z19
.
|
2. |
Aut
: Remove the driver plate.
|
3. |
Man
: Remove the flywheel.
|
4. |
Remove
Oil sump (in situ)
.
|
5. |
Remove the bolts.
|
6. |
Remove the crankshaft seal ring.
|
To fit |
1. |
Clean the sealing surface.
|
2. |
Fit the crankshaft seal ring using
32 025 044 Fitting tool, crankshaft seal
.
|
3. |
Fit the bolts.
Tightening torque: 9 Nm (6 lbf ft) |
4. |
Fit
Oil sump (in situ)
.
|
5. |
Man
: Fit the flywheel.
|
6. |
Aut
: Fit the driver plate. Use
Thread locking adhesive, Loctite 270
.
Tightening torque 160 Nm (118 lbf ft) |
7. |
Fit the gearbox. See
Gearbox installation Z19
or
Gearbox assembly, Z19
.
|