SAAB WIS ONLINE

Exhaust Gas Recirculation Valve Cooler Replacement

Exhaust Gas Recirculation Valve Cooler Replacement



Callout Component Name

Preliminary Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement (Diesel) Battery Tray Replacement (LDK/A20NHT)

2. Remove the engine coolant temperature sensor.

3. Remove the engine coolant thermostat replacement. Refer to Engine Coolant Thermostat Replacement (LDK/A20NHT) Engine Coolant Thermostat Replacement (Diesel)

4. Remove the exhaust gas recirculation cooling pipe replacement - upper. Refer to Exhaust Gas Recirculation Cooling Pipe Replacement - Upper

5. Remove the exhaust gas recirculation valve. Refer to Exhaust Gas Recirculation Valve Replacement

6. Remove the exhaust gas recirculation pipe. Refer to Exhaust Gas Recirculation Pipe Replacement

7. Remove the exhaust gas recirculation vacuum regulator solenoid valve. Refer to Exhaust Gas Recirculation Vacuum Regulator Valve Solenoid Replacement

8. Remove and mark up vacuum and electrical connections.


1

Oil Dipstick Fastener

Refer to Fastener Caution .

Tighten

10 Nm (88.6 lb in)

2

Exhaust Gas Recirculation Valve Cooler Fasteners (Qty: 4)

Tighten

25 Nm (18 lb ft)

3

Exhaust Gas Recirculation Valve Cooler Gasket

Procedures

Install NEW gasket.

4

Exhaust Gas Recirculation Valve Cooler

Procedures

Transfer any part as needed.