OnStar Voice Recognition Malfunction
|
OnStar Voice Recognition Malfunction
|
Circuit/System Description
|
The telematics communication interface control module is capable of interpreting voice commands received over the cellular microphone circuits. Speech recognition allows the user to speak to one computer in the vehicle, and one reached over the cellular communication network. The module attempts to understand the users command, and responds by speaking back, or by taking the appropriate action, e.g. dialing the phone.
Schematic Reference
OnStar Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
OnStar Description and Operation
Electrical Information Reference
Circuit/System Verification
|
Note
|
•
|
It is necessary to have the vehicle in an open outside area where a cellular call can be successfully placed and GPS data can be received from satellites.
|
•
|
The vehicle should be located in a quiet area.
|
1.
|
Ignition ON, press OnStar® Call button. Verify that your voice is heard clearly by the OnStar® Call Center.
|
3.
|
Press the OnStar® Call answer button. Attempt to operate the OnStar® system using multiple different voice commands. Verify the system responds appropriately to all voice commands.
|
4.
|
If the OnStar® system does not respond to any voice commands, replace the K73 telematics communication interface control module.
|
5.
|
If the system is operational, but does not respond appropriately to certain commands refer to
OnStar Description and Operation
for tips on proper pronunciation.
|
Perform the
Diagnostic Repair Verification
after completing the diagnostic procedure.
Control Module References
for telematics communication interface control module replacement, setup, and programming