SAAB WIS ONLINE

DTC B0988

DTC B0988

Diagnostic Instructions


• Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.

• Review Strategy Based Diagnosis for an overview of the diagnostic approach.

• Diagnostic Procedure Instructions provides an overview of each diagnostic category.


DTC Descriptor

DTC B0988 00

Vehicle Direction Camera Control Module Malfunction

Circuit/System Description

The vehicle direction camera control module will require a recalibration procedure after replacing.

Conditions for Running the DTC

Ignition ON

Conditions for Setting the DTC

The calibration of the vehicle direction camera control module is still not completed successfully.

Action Taken When the DTC Sets


• Lane departure warning is disabled.

• SERVICE LANE DEPARTURE SYSTEM is displayed on the driver information center.


Conditions for Clearing the DTC

The condition for setting the DTC is no longer present.

Reference Information

Schematic Reference

Object Detection Schematics

Connector End View Reference

Component Connector End Views

Description and Operation

Object Detection Description and Operation (Parking Assist) Object Detection Description and Operation (Lane Departure Warning) Object Detection Description and Operation (Parking Assist with Parallel Parking) Object Detection Description and Operation (Traffic Sign Assist)

Electrical Information Reference


• Circuit Testing

• Connector Repairs

• Testing for Intermittent Conditions and Poor Connections

• Wiring Repairs


Scan Tool Reference

Control Module References for scan tool information

Circuit/System Verification

Verify DTC B0988 is not set.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for vehicle direction camera control module replacement, setup and programming