DTC B3976
DTC B3976 |
Diagnostic Instructions |
• |
Perform the
Diagnostic System Check - Vehicle
prior to using this diagnostic procedure.
|
• |
Review
Strategy Based Diagnosis
for an overview of the diagnostic approach.
|
• |
Diagnostic Procedure Instructions
provides an overview of each diagnostic category.
|
DTC Descriptor |
DTC B3976 00
Unconfigured Transponder
Circuit/System Description |
When the body control module (BCM) is in the learn coded key state, the BCM checks the current key to ensure it has been configured as a proper vehicle key.
Conditions for Running the DTC |
• |
Ignition is in the Accessory or Run position.
|
• |
The BCM is in the learn coded key state.
|
Conditions for Setting the DTC |
The BCM has determined the current key is not configured as a proper vehicle key.
Action Taken When the DTC Sets |
• |
Vehicle starting will be disabled.
|
• |
The security indicator in the instrument cluster will be illuminated. A service message will be displayed in the driver information center.
|
Conditions for Clearing the DTC |
• |
A current DTC will be cleared when the BCM detects a properly configured vehicle key.
|
• |
A history DTC will be cleared after 100 malfunction-free ignition cycles or when a scan tool is used to clear DTCs.
|
Reference Information |
Schematic Reference
Immobilizer Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Immobilizer Description and Operation
Electrical Information Reference
• |
Circuit Testing
|
• |
Connector Repairs
|
• |
Testing for Intermittent Conditions and Poor Connections
|
• |
Wiring Repairs
|
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification |
While viewing DTCs with a scan tool, attempt to start the vehicle using all of the available keys. The vehicle should start with all available keys.
Repair Instructions |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Replacing Keys