Body Side Outer Panel Extension Replacement
Body Side Outer Panel Extension Replacement |
Removal Procedure |
Refer to Approved Equipment for Collision Repair Warning .
Refer to Collision Sectioning Warning .
1. |
Disable the SIR system. Refer to
SIR Disabling and Enabling
.
|
2. |
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
3. |
Remove the body side outer panel. Refer to
Body Side Outer Panel Replacement
.
|
4. |
Visually inspect the damage. Repair as much of the damage as possible.
|
5. |
Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair (Base)
Anti-Corrosion Treatment and Repair (Corrosion Protection)
.
|
6. |
|
7. |
Locate and drill out all of the necessary factory welds.
|
8. |
Remove the damaged body side outer panel extension.
|
Installation Procedure |
1. |
Prepare all attachment surfaces (1) as necessary.
|
2. |
Apply bodywork repair through structural adhesive to body. Refer to
Structural Adhesive Body Repairs
.
|
3. |
Position the body side outer panel extension on the vehicle.
|
4. |
Verify the fit of the body side outer panel extension.
|
5. |
Clamp the body side outer panel extension into position.
|
6. |
Spot weld (1) the body side outer panel extension accordingly. |
7. |
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair (Base)
Anti-Corrosion Treatment and Repair (Corrosion Protection)
.
|
8. |
Install the body side outer panel. Refer to
Body Side Outer Panel Replacement
or install the quarter outer panel. Refer to
Quarter Outer Panel Replacement
.
|
9. |
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
10. |
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
|