SAAB WIS ONLINE

Driver or Passenger Seat Back Cushion Cover Replacement (8-Way-Power)

Driver or Passenger Seat Back Cushion Cover Replacement (8-Way-Power)

Removal Procedure


1. Refer to SIR Warning .

Disable the SIR system. Refer to SIR Disabling and Enabling .

2. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Replacement (8-Way-Power) .

3. Remove the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) .

4. Remove driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

5. Remove driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) .

6. Remove the front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

7. Clip out retaining ring (1) of recliner control shaft (2).


8. Unhinge the cushion strap (1) from the seat frame.


9. Release the front seat back cushion from the backrest left side (1) and right side (2).


10. Release both fasteners (1, 2) from the seat side inflatable restraint module (3).


11. Disconnect the wiring harness connector (2) from the seat side inflatable restraint module (1).


12. Remove the front seat back cushion with the cushion pad (1) from the backrest frame (2).


13. Remove the seat side inflatable restraint module (1) out of the textile straps (2).


14. Remove the hog rings from the seat cushion (1), pull the cushion cover from the cushion pad (2).



Installation Procedure


1. Install the front seat cushion cover to the cushion pad with new hog rings.

2. Install the seat side inflatable restraint module (1) to the cushion cover with the textile straps (2).


3. Install the front seat back cushion with the cushion pad (1) to the backrest frame (2).


4.
Note

Proof the correct locking of wiring harness connector (2).


Connect the wiring harness connector (2) to the seat side inflatable restraint module (1).


5. Refer to Fastener Caution .

Position the seat side inflatable restraint module (3) at the backrest frame. Tighten both fasteners (1, 2) to the seat side inflatable restraint module (3).

Tighten

3,25 Nm (29 lb in)


6. Install the front seat back cushion to the backrest left side (1) and right side (2).


7. Install the front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

8. Install the front seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Head Restraint Replacement (8-Way Power) .

9. Close the cushion at the backrest rear side.

10. Install the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) .

11. Install the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

12. Install the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) .

13. Install driver or passenger seat. Refer to Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Replacement (8-Way-Power) .