SAAB WIS ONLINE

Front Seat Back Cushion Vent Fan Mat Replacement (Driver or Passenger Seat 6-Way Hybrid)

Front Seat Back Cushion Vent Fan Mat Replacement (Driver or Passenger Seat 6-Way Hybrid)

Removal Procedure

Refer to SIR Warning .


1. Disable the SIR system. Refer to SIR Disabling and Enabling .

2. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Replacement (8-Way-Power) .

3. Remove front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) .

4. Remove driver or passenger seat recliner lever. Refer to Driver or Passenger Seat Recliner Lever Replacement .

5. Remove front seat tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .

6. Remove driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

7. Remove driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) .

8. Remove front seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Head Restraint Replacement (8-Way Power) .

9. Remove front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

10. Remove the front seat head restraint adjust rod guide. Refer to Front Seat Head Restraint Adjust Rod Guide Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Adjust Rod Guide Replacement (8-Way-Power) .

11. Clip out the securing (1) of the recliner control shaft (2).


12. Remove the recliner control (1) from the recliner shaft (2). Unhinge the cushion strap (3) at seat frame.


13. Loosen the front seat back cushion at backrest left side (1) and right side (2).

Note

For loosening move the cushion upper and pull from the backrest frame.



14. Clip out the front seat back cushion vent fan mat (3) of vent fan (4). Pull the cushion (5) in front to surface.

15. Loosen both nuts (1, 2) from the seat side inflatable restraint module (3).


16. Disconnect the wiring harness connector (2) from the seat side inflatable restraint module (1).


17. Disconnect wiring harness connector (1) of the seat back cushion heater.


18. Remove the front seat back cushion with cushion pad (1) from the backrest frame (2).


19. Remove the seat side inflatable restraint module (1) out of the textile straps (2).


20. Remove the hog rings from the under side of the seat cushion (1), pull the cushion cover off of the pad.


21. Label the position of the seat back cushion heater (1) with marker.


22.
Note

Remove the heating mat careful from seat back cushion pad. If the seat cushion pad is too strongly damaged, this must be replaced.


Remove the front seat back cushion heater (1) from the seat back cushion pad (2).


23. Install the front seat back cushion heater (1) at cushion pad:

Remove the foil from the new vent mat, and install the seat back cushion heater at cushion pad. Proof the correct position and gluing of the seat back cushion heater.


24. Remove the front seat back cushion vent fan mat (2) from cushion pad (1).



Installation Procedure


1. Install the front seat back cushion vent fan mat (1) at seat back cushion pad (2):

Remove the foil from the new back cushion vent fan mat, and install the back cushion vent fan mat. Proof the correct position of back cushion vent fan mat at seat back cushion pad.


2. Install front seat cushion cover (1) at the cushion pad (2) with hog rings.


3. Install the seat side inflatable restraint module (1) to the cushion cover with the textile straps (2).


4. Install the front seat back cushion with cushion pad (1) at the backrest frame (2).


5. Connect the wiring harness connector (1) of the seat back cushion heater.


6.
Note

Proof the correct locking of wiring harness connector (2).


Connect the wiring harness connector (2) to the seat side inflatable restraint module (1).


7. Refer to Fastener Caution .

Position the seat side inflatable restraint module (3) at the backrest frame. Screw both nuts (1, 2) from seat side inflatable restraint module (3).

Tighten

3,25 Nm (29 lb in)


8. Clip in the front seat back cushion vent fan mat (3) at the vent fan (4). Position the cushion (5).


9. Install the front seat back cushion at backrest left side (1) and right side (2).

10. Install the front seat head restraint adjust rod guide. Refer to Front Seat Head Restraint Adjust Rod Guide Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Adjust Rod Guide Replacement (8-Way-Power) .

11. Install the front seat head restraint guide bezel. Refer to Front Seat Head Restraint Guide Bezel Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Front Seat Head Restraint Guide Bezel Replacement (8-Way Power) .

12. Install the front seat head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Head Restraint Replacement (8-Way Power) .

13. Close the cushion at the backrest rear side.

14. Install the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Inner Recliner Finish Cover Replacement (8-Way-Power) .

15. Install the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way Power) Driver or Passenger Seat Adjuster Finish Cover Replacement (Lower 8-Way Power) .

16. Install the tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .

17. Install the driver or passenger seat recliner lever. Refer to Driver or Passenger Seat Recliner Lever Replacement .

18. Install the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) .

19. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Replacement (8-Way-Power) .