SAAB WIS ONLINE

Camshaft Exhaust Sprocket Replacement (LLU/A16LET)

Camshaft Exhaust Sprocket Replacement (LLU/A16LET)



Special Tools

EN-6340 Locking Tool

EN-6625 Flywheel Holder

EN-6628-A Fixing Tool


For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the timing belt. Refer to Timing Belt Replacement (LLU/A16LET) .

2. Remove the camshaft cover. Refer to Camshaft Cover Replacement .

3. Install the EN-6628-A fixing tool (1).


4. Install EN-6625 flywheel holder (1) to engine block (2).


5. Remove the camshaft position actuator hub cover plug at the exhaust side (1).


6. Remove the camshaft exhaust sprocket fastener (1) and detach the camshaft exhaust sprocket (2).



Installation Procedure


1. Attach the camshaft exhaust sprocket.


2. Install the EN-6340 locking tool.

3. Adjust the timing belt. Refer to Timing Belt Replacement (LLU/A16LET) .

4. Refer to Fastener Caution .

Install the camshaft exhaust sprocket fastener and tighten the fastener to 65 Nm (48 lb ft) + 125 degrees + 15 degrees .

5. Install the camshaft position actuator hub cover plug (1) at the exhaust side and tighten the fastener 30 Nm (22 lb ft) .


6. Install the timing belt. Refer to Timing Belt Replacement (LLU/A16LET) .

7. Remove EN-6625 flywheel holder, EN-6628-A fixing tool and EN-6340 locking tool.

8. Install the camshaft cover. Refer to Camshaft Cover Replacement .

9. Install the timing belt front upper cover. Refer to Timing Belt Upper Front Cover Replacement .