SAAB WIS ONLINE

Exhaust Particulate Filter Replacement (LBS/A20DTH)

Exhaust Particulate Filter Replacement (LBS/A20DTH)



Callout Component Name

Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the engine shield. Refer to Engine Shield Replacement .

3. Remove the engine cover. Refer to Engine Cover Replacement .

4. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LBS/A20DTH) Exhaust Manifold Heat Shield Replacement (LBY/A20DTR) Exhaust Manifold Heat Shield Replacement (LLU/A16LET) Exhaust Manifold Heat Shield Replacement (LHU/A20NFT) .

5. Remove the exhaust temperature sensor in position 1. Refer to Exhaust Temperature Sensor Replacement - Position 1 (LBY/A20DTR) Exhaust Temperature Sensor Replacement - Position 1 (LBS/A20DTH) .

6. Remove the heated exhaust oxygen sensor. Refer to Heated Oxygen Sensor Replacement (LBY/A20DTR) Heated Oxygen Sensor Replacement (LBS/A20DTH) .

7. Remove the exhaust heat shield. Refer to Exhaust Heat Shield Replacement (LBY/A20DTR) Exhaust Heat Shield Replacement (LBS/A20DTH) .


1

Exhaust Particulate Filter Securing Fastener (Qty: 4)

Refer to Fastener Caution .


Procedure

1. Release the 2 exhaust particulate filter to sump fasteners.

2. Release the 2 exhaust particulate filter to block fasteners.


Tighten

23 Nm (17 lb ft)

2

Exhaust Particulate Filter Fasteners (Qty: 3)

Procedure

Release the exhaust particulate filter to exhaust pipe fasteners.

Tighten

20 Nm (15 lb ft)

3

Exhaust Particulate Filter Clamp

Procedure

Release the exhaust particulate filter to exhaust manifold.

4

Exhaust Particulate Filter

Note

After replacement, activate DPF Reset with diagnostic tool.