SAAB WIS ONLINE

Brake, Accelerator, and Clutch Pedal Replacement (Left Hand Drive)

Brake, Accelerator, and Clutch Pedal Replacement (Left Hand Drive)



Callout Component Name

Preliminary Procedure

1. Remove the front floor console. Refer to Front Floor Console Replacement .

2. Remove the Instrument Panel Outer Trim Cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .

3. Remove the windshield side garnish molding. Refer to Windshield Side Garnish Molding Replacement .

4. Remove the front and rear side door sill trim plate. Refer to Front and Rear Side Door Sill Trim Plate Replacement .

5. Remove the 2 fasteners to the power vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement (Left Hand Drive) Power Vacuum Brake Booster Replacement (Right Hand Drive) .

6. Remove the clutch master cylinder. Refer to Clutch Master Cylinder Replacement (Right Hand Drive) Clutch Master Cylinder Replacement (Left Hand Drive) .

7. Remove the steering column. Refer to Steering Column Replacement .

8. Release the hood release handle and release the instrument panel tie bar and lift it out and secure the tie bar approximately 40 mm out, on the right side of the car. The fasteners to the pedal assembly need to be removed before the tie bar is released. Refer to Instrument Panel Tie Bar Replacement .


1

Brake, Accelerator, and Clutch Pedal Assembly Fastener (Qty: 7)

Refer to Fastener Caution .

Tighten

22 Nm (16 lb ft)

2

Brake, Accelerator, and Clutch Pedal


Procedure

1. Remove the electrical connectors.

2. Release the brake pedal from the pushrod, by pulling the pedal backwards.

3. Install the NEW click fit connector on brake pedal arm.