Engine Coolant Heater Replacement
Engine Coolant Heater Replacement |
Removal Procedure |
1. |
Remove the front bumper fascia. Refer to
Front Bumper Fascia Replacement
|
2. |
Release the engine coolant heater exhaust pipe. Refer to
Engine Coolant Heater Exhaust Pipe Replacement (Unit/Silencer)
Engine Coolant Heater Exhaust Pipe Replacement (Pipe with Endcap)
.
|
3. |
Release the engine coolant heater air supply hose. Refer to
Engine Coolant Heater Air Supply Hose Replacement
.
|
4. |
Release the engine coolant inlet hose.
Close the inlet hose (1) with a suitable tool (2). |
5. |
Release the engine coolant outlet hose.
Close the outlet hose (3) with a suitable tool (4). |
6. |
Disconnect the electrical connector and remove the retainer.
|
7. |
Release the fuel feed pipe (1) from the engine coolant heater (2).
Open the retainer with a suitable tool. |
8. |
Release the heater water auxiliary pump bracket from the engine coolant haeter bracket - big. Refer to
Heater Water Auxiliary Pump Bracket Replacement
.
|
9. |
Remove the engine coolant heater bracket - small. Refer to
Engine Coolant Heater Bracket Replacement (Front)
Engine Coolant Heater Bracket Replacement (Rear)
.
|
10. |
Remove the engine coolant heater from the engine coolant heater bracket - big. Refer to
Engine Coolant Heater Replacement
.
|
11. |
Remove heater water auxuliary pump from the engine coolant heater. Refer to
Heater Water Auxiliary Pump Replacement
.
|
Installation Procedure |
1. |
Installheater water auxuliary pump to the engine coolant heater. Refer to
Heater Water Auxiliary Pump Replacement
.
|
2. |
Install the engine coolant heater to the engine coolant heater bracket - big. Refer to
Engine Coolant Heater Replacement
.
|
3. |
Install the engine coolant heater bracket - small. Refer to
Engine Coolant Heater Bracket Replacement (Front)
Engine Coolant Heater Bracket Replacement (Rear)
.
|
4. |
Install the heater water auxiliary pump bracket to the engine coolant haeter bracket - big. Refer to
Heater Water Auxiliary Pump Bracket Replacement
.
|
5. |
Install the fuel feed pipe (1) to the engine coolant heater (2).
|
6. |
Disconnect the electrical connector.
|
7. |
Install the park heater coolant inlet hose (1) to park heater recirculation pump (2).
|
8. |
Bleeding the cooling system into the following steps and install the park heater outlet hose. |
• |
Lock the connection pieces from the output connection with a suitable finger.
|
• |
Open the clip from the inlet side of the heating.
|
• |
Open carefully the output connection of the heating.
|
• |
If coolant liquid withdraws, put the outlet hose from the outlet connection on the connection piece.
|
9. |
Install the engine coolant heater air supply hose. Refer to
Engine Coolant Heater Air Supply Hose Replacement
.
|
10. |
Install the engine coolant heater exhaust pipe. Refer to
Engine Coolant Heater Exhaust Pipe Replacement (Unit/Silencer)
Engine Coolant Heater Exhaust Pipe Replacement (Pipe with Endcap)
.
|
11. |
Install the front bumper fascia. Refer to
Front Bumper Fascia Replacement
|