SAAB WIS ONLINE

DTC P0336 CRANKSHAFT POSITION SENSOR “A” CIRCUIT RANGE/PERFORMANCE

DTC P0336 CRANKSHAFT POSITION SENSOR “A” CIRCUIT RANGE/PERFORMANCE

DTC DETECTING CONDITION:


• Two consecutive driving cycles with fault

• GENERAL DESCRIPTION


TROUBLE SYMPTOM:


• Engine stalls.

• Failure of engine to start


Important

After repair or replacement of faulty parts, conduct Clear Memory Mode and Inspection Mode .


WIRING DIAGRAM:


CHECK ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed?

Yes

Inspect the relevant DTC using “List of Diagnostic Trouble Code (DTC)”.


No


CHECK CONDITION OF CRANKSHAFT POSITION SENSOR.

Turn the ignition switch to OFF.

Is the crankshaft position sensor installation bolt tightened securely?

Yes


No

Tighten the crankshaft position sensor installation bolt securely.


CHECK CRANK SPROCKET.

Remove the front belt cover.

Are the crank sprocket teeth cracked or damaged?

Yes

Replace the crank sprocket.


No


CHECK INSTALLATION CONDITION OF TIMING BELT.

Turn the crankshaft, and align alignment mark on crank sprocket with alignment mark on cylinder block.

Is the timing belt dislocated from its proper position?

Yes

Repair the installation condition of timing belt.


No

Replace the crankshaft position sensor.