SAAB WIS ONLINE

DTC P0336 CRANKSHAFT POSITION SENSOR “A” CIRCUIT RANGE/PERFORMANCE

DTC P0336 CRANKSHAFT POSITION SENSOR “A” CIRCUIT RANGE/PERFORMANCE

DTC DETECTING CONDITION:


• Immediately at fault recognition

• GENERAL DESCRIPTION


TROUBLE SYMPTOM:


• Engine stalls.

• Failure of engine to start


Important

After repair or replacement of faulty parts, conduct Clear Memory Mode and Inspection Mode .


WIRING DIAGRAM:


CHECK ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed?

Yes

Inspect DTC using “List of Diagnostic Trouble Code (DTC)”.


No


CHECK CONDITION OF CRANKSHAFT POSITION SENSOR.

Turn the ignition switch to OFF.

Is the crankshaft position sensor installation bolt tightened securely?

Yes


No

Tighten crankshaft position sensor installation bolt securely.


CHECK CRANK SPROCKET.

Remove the timing belt cover.

Are crank sprocket teeth cracked or damaged?

Yes

Replace the crank sprocket.


No


CHECK INSTALLATION CONDITION OF TIMING BELT.

Turn the crankshaft using ST, and align alignment mark on crank sprocket with alignment mark on cylinder block.

ST 32005170 CRANKSHAFT SOCKET

Is the timing belt dislocated from its proper position?

Yes

Repair installation condition of timing belt.


No

Replace the crankshaft position sensor.