INSTALLATION

INSTALLATION

Install the cam sprocket. To lock the camshaft, use ST.

ST 32005019 CAM SPROCKET WRENCH (INTAKE LH)

ST 32005125 CAM SPROCKET WRENCH (Except INTAKE LH)

Tighten the bolts temporarily with tightening torque of 30 Nm (3.1 kgf-m, 22.1 ft-lb)

Tighten the cam sprocket bolts.

Note
Do not confuse the cam sprockets (RH) and (LH) intake side during installation. The cam sprocket (LH) is identified by a projection used to monitor camshaft position sensor.

Install the camshaft position sensor.

Install the timing belt assembly.

Install the timing belt cover.

Install the crank pulley.

Install the V-belt.