SAAB WIS ONLINE

Camshaft Intake Sprocket Replacement (LDE/A16XER, 2H0/A18XER)

Camshaft Intake Sprocket Replacement (LDE/A16XER, 2H0/A18XER)



Special Tools

• EN-6340 Locking Tool

• EN-6628-A Fixing Tool

• EN-6625 Flywheel Holder


For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the timing belt. Refer to Timing Belt Replacement (LLU/A16LET) .

2. Remove the camshaft cover. Refer to Camshaft Cover Replacement .

3. Install the EN-6628-A fixing tool (1).


4. Install EN-6625 flywheel holder (1) to engine block (2).


5. Remove the camshaft position actuator hub cover plug at the intake side (1).


6. Remove the camshaft intake sprocket fastener (1) and detach the camshaft intake sprocket (2).



Installation Procedure


1. Attach the camshaft intake sprocket (2) with the camshaft intake sprocket fastener (1) to the intake camshaft. Do not tighten yet.


2. Install the EN-6340 locking tool.

3. Adjust the timing belt. Refer to Timing Belt Adjustment (1.6L LLU) .

4. Refer to Fastener Caution .

Install the camshaft intake sprocket fastener and tighten the fastener to 65 Nm (48 lb ft) + 125 degrees + 15 degrees.

5. Install the camshaft position actuator hub cover plug at the intake side and tighten the fastener 30 Nm (22 lb ft) .


6. Install the timing belt. Refer to Timing Belt Replacement (LLU/A16LET) .

7. Remove EN-6625 flywheel holder, EN-6628-A fixing tool and EN-6340 locking tool.

8. Install the camshaft cover. Refer to Camshaft Cover Replacement .

9. Install the timing belt front upper cover. Refer to Timing Belt Upper Front Cover Replacement .