SAAB WIS ONLINE

Camshaft Cover Replacement - Left Side

Camshaft Cover Replacement - Left Side



Callout Component Name

Preliminary Procedure

1. Remove the catalytic converter from the turbocharger. Refer to Catalytic Converter Replacement (LAU/A28NER) Catalytic Converter Replacement (LBY/A20DTR) Catalytic Converter Replacement (LLU/A16LET) Catalytic Converter Replacement (LBS/A20DTH) Catalytic Converter Replacement (LHU/A20NFT) Catalytic Converter Replacement (LHU/A20NFT - AWD) .

2. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement .

3. Remove the secondary air injection outlet pipe. Refer to Secondary Air Injection Pump Pipe Replacement .

4. Remove the positive crankcase ventilation tube from the oil level indicator tube.


1

Camshaft Cover Positive Crankcase Ventilation Tube

2

Engine Wiring Harness

Refer to Fastener Caution .


Procedure

1. Remove the wiring harness connectors.

2. Remove both fasteners.


Tighten

20 Nm (15 lb ft)

3

Secondary Air Injection Check Valve Fastener

Tighten

65 Nm (48 lb ft)

4

Secondary Air Injection Check Valve Fastener (Qty: 3)

Tighten

10 Nm (89 lb in)

5

Secondary Air Injection Check Valve

Note

Use NEW gasket.


6

Engine Support Fixture Fastener (Qty: 2)

Tighten

65 Nm (48 lb ft)

7

Engine Support Fixture

8

Camshaft Cover - Left Side


Procedure

1. Remove the ignition coils - bank 2. Refer to Ignition Coil Replacement - Bank 2 .

2. Remove the camshaft cover - bank 1. Refer to Camshaft Cover Removal - Left Side (LAU or LBW) .

3. Install the camshaft cover - bank 1. Refer to Camshaft Cover Installation - Left Side (LAU or LBW) .