Exhaust Pipe Heat Shield Replacement (LBY/A20DTR)
Exhaust Pipe Heat Shield Replacement (LBY/A20DTR) |
Removal Procedure |
1. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
3. |
Remove the exhaust particulate filter with exhaust rubber mount bracket. Refer to
Exhaust Particulate Filter Replacement (LBY/A20DTR All Wheel Drive)
Exhaust Particulate Filter Replacement (LBS/A20DTH)
.
|
4. |
If equipped with AWD: Remove the propeller shaft. Refer to
Propeller Shaft Replacement
.
|
5. |
Remove the reinforcement bolts (1).
|
6. |
Loosen the front suspension frame rear bolts from body (2).
|
7. |
Move the reinforcements (3) to obtain the needed access.
|
8. |
Remove the 8 heat shield fasteners (1).
|
9. |
Remove the exhaust heat shield (2).
|
Installation Procedure |
1. |
Position the exhaust heat shield (2) to the vehicle.
|
2. |
Refer to
Fastener Caution
.
Install the 8 heat shield fasteners (1) and tighten to 1.5 Nm (13 lb in) . |
3. |
Move the reinforcements (3) back in place.
|
4. |
Install the reinforcements bolts (1) and tighten the front suspension frame rear bolts (2) to body. Refer to
Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNA)
Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNB)
.
|
5. |
If equipped with AWD, install the propeller shaft. Refer to
Propeller Shaft Replacement
.
|
6. |
Install the exhaust particulate filter with exhaust rubber mount bracket. Refer to
Exhaust Particulate Filter Replacement (LBY/A20DTR All Wheel Drive)
Exhaust Particulate Filter Replacement (LBS/A20DTH)
.
|
8. |
Lower the vehicle.
|