Steering Knuckle Replacement (GNB)
/
9-5 (9650)
/
2011
/
7. Suspension, wheels
/
Front suspension
/
Adjustment/replacement
/
Steering Knuckle Replacement (GNB)
Steering Knuckle Replacement (GNB)
Callout
Component Name
Preliminary Procedure
1.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
2.
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
3.
Separate the outer tie rod end from the knuckle. Refer to
Steering Linkage Outer Tie Rod Replacement
.
4.
Remove the outer fastener lower control arm. Refer to
Lower Control Arm Replacement (GNA)
Lower Control Arm Replacement (GNB)
.
5.
Remove the front brake rotor. Refer to
Front Brake Rotor Replacement (J60, J61, J62)
Front Brake Rotor Replacement (J64)
.
6.
Undo the wheel drive shaft from the wheel bearing/hub. Refer to
Front Wheel Drive Shaft Replacement - Left Side (GNA)
Front Wheel Drive Shaft Replacement - Left Side (GNB)
and
Front Wheel Drive Shaft Replacement - Right Side (GNB)
Front Wheel Drive Shaft Replacement - Right Side (Petrol)
.
7.
Remove the front wheel speed sensor. Refer to
Front Wheel Speed Sensor Replacement (GNA)
Front Wheel Speed Sensor Replacement (GNB)
.
8.
Separate the yoke from the suspension strut. Refer to
Strut Assembly Replacement (GNA)
Strut Assembly Replacement (GNB)
.
9.
Remove the king pin from steeringknuckle. Refer to
Steering Knuckle King Pin Bushing Replacement (GNB)
.
10.
Remove the steering knuckle upper ball stud from knuckle. Refer to
Steering Knuckle Upper Ball Stud Replacement (GNB)
.
11.
Remove the wheel bearing/hub. Refer to
Front Wheel Bearing and Hub Replacement (GNA)
Front Wheel Bearing and Hub Replacement (GNB)
.
1
Steering Knuckle